How to Clean Your Dishwasher Filter (and Why It Matters)
If there is one maintenance job every dishwasher owner should know, it is cleaning the filter. A blocked filter is behind a large share of the faults we are called out for, from dishwashers not draining to dishes coming out dirty and bad smells. It takes about ten minutes.
Where Is the Filter?
On most modern dishwashers, the filter sits in the base of the tub, underneath the lower spray arm. It usually has two parts: a cylindrical fine filter that twists out, and a flat mesh plate around it.
Step-by-Step: Cleaning the Filter
- Switch off the dishwasher at the wall.
- Remove the lower basket to get clear access.
- Twist the cylindrical filter anticlockwise, usually a quarter turn, and lift it out. The flat mesh plate will lift out with it or just after.
- Separate the parts. Many filters come apart into two or three pieces.
- Rinse under warm running water, using a soft brush such as an old toothbrush to clean the fine mesh. Avoid wire brushes or scourers, which can damage the mesh.
- Check the sump below where the filter sat. Remove any glass, seeds or labels. Be careful of broken glass.
- Refit the filter and turn it until it locks. A filter that is not properly locked can let debris into the pump.
While You Are There: Clean the Spray Arms
Remove the spray arms, which usually clip or unscrew, and rinse them. Use a toothpick to clear any blocked holes. Spin them by hand after refitting to make sure they turn freely.
A Simple Monthly Routine
- Clean the filter.
- Wipe the door seal with a damp cloth to remove food residue.
- Check the spray arms turn freely.
- Top up rinse aid, and dishwasher salt if your model uses it.
- Every one to two months, run an empty hot cycle with a dishwasher cleaner.
Signs Your Filter Needs Cleaning
- Water left in the bottom after a cycle.
- Gritty residue on glasses or plates.
- An unpleasant smell when you open the door.
- An error code relating to drainage or the filter.
When Cleaning Is Not Enough
If problems continue after a thorough clean, the fault may be in the drain pump, wash pump, inlet valve or heater. That is the time to call a technician.
Frequently Asked Questions
How often should I clean my dishwasher filter?
Once a month for most households, or every two weeks if you run the dishwasher daily or do not scrape plates.
Does every dishwasher have a removable filter?
Most modern dishwashers do. Some older models had self-cleaning filters with a grinder, which do not need regular cleaning.
Can I put the filter in the dishwasher?
No. Wash it by hand under warm water with a soft brush.
Need a Technician?
If you have worked through the checks above and the problem is still there, it is time for a proper diagnosis. Apex Home Appliance repairs all major dishwasher brands on-site across Greater Western Sydney. Call 0432 934 777 or book online, and see our dishwasher repair service for the areas we cover.