0432 934 777
Welcome to Apex Home Appliance Company

Dishwasher Not Drying Dishes? Why It Happens and How to Fix It

dishwasher repair in Greater Western Sydney

Dishwasher Not Drying Dishes? Why It Happens and How to Fix It

Opening the dishwasher to find everything still wet, especially plastics and the inside of cups, is a common complaint. Sometimes it is a genuine fault, but very often it comes down to how modern dishwashers are designed to dry.

How Dishwashers Dry

Older dishwashers used a heating element to bake dishes dry. Many modern, energy-efficient models use condensation drying instead: the final rinse heats the dishes, and moisture condenses on the cooler stainless-steel walls and drains away. Some models also open the door slightly at the end of the cycle. These methods use less power, but they dry plastics poorly, because plastic does not hold heat.

Easy Fixes to Try First

Use Rinse Aid

Rinse aid is the single biggest factor in drying. It helps water run off dishes instead of sitting in droplets. Make sure the reservoir is topped up and the setting is not on the lowest level.

Choose the Right Program

Eco programs run cooler and take longer. If drying matters, use a program with a higher final rinse temperature, or turn on the extra-dry option if your model has one.

Unload the Bottom Basket First

Water collects in upturned cups in the top basket. Unloading the bottom first stops it dripping onto dry dishes.

Load for Drainage

Angle cups and bowls so water runs off, and avoid nesting items together.

Leave the Door Ajar

Opening the door a little after the cycle finishes lets steam escape and dishes air-dry.

Signs of a Real Fault

  • Dishes are wet and cold at the end of the cycle, not just plastics.
  • Dishes are also coming out dirty or greasy.
  • Drying has suddenly got much worse with no change in detergent or program.
  • An error code relating to heating appears.

These point to a failed heating element, a faulty thermostat or temperature sensor, a heat pump fault, or a vent or fan that is not opening. Heating faults also affect cleaning, so see our guide to a dishwasher not cleaning properly as well.

What a Technician Checks

  • Whether the water reaches the correct temperature.
  • Heating element or heat pump continuity.
  • Thermostat and temperature sensor readings.
  • The drying fan and vent, on models that have them.
  • The rinse aid dispenser.

Frequently Asked Questions

Why are my plastic containers always wet?

Plastic does not hold heat, so condensation drying works poorly on it. This is normal and not a fault. Rinse aid and leaving the door ajar help.

Can I use vinegar instead of rinse aid?

We do not recommend it. Vinegar can affect rubber seals over time. Use a proper rinse aid.

Why are my dishes wet and cold?

Dishes that are cold at the end of a cycle point to a heating fault, which should be checked by a technician.

Need a Technician?

If you have worked through the checks above and the drying problem is still there, it is time for a proper diagnosis. Apex Home Appliance repairs all major dishwasher brands on-site across Greater Western Sydney. Call 0432 934 777 or book online, and see our dishwasher repair service for the areas we cover.